Checked My Hive

It seems like it has been forever since I was able to go check on my bees. I wanted to ensure that they were doing ok but every week seemed to bring in bad weather. It would either snow, rain or be well below 50 degrees. I was able to quickly work my hive 3 weeks ago but that was just to throw on some fondant and add corn syrup to my hive top feeder. This past weekend was the first decent weekend that I had a full day of sunshine.

As I got to my hive, I saw that my girls were out and about, bringing in pollen. That was a great sign. What wasn't so great was seeing twenty or thirty bees dead on the ground in front of my hive. Assuming that it was disease or starvation (again, it has been 3 weeks since I last checked my hive) I began to get worried about what I would find.

Bringing in Pollen

Dead Bees in Front of Hive

The corn syrup in my hive top feeder was mostly crystalized but there were a lot of bees still feeding from it. Using my hive top, I started scrapping it out but found that it was still soft and moist so I sat it to the side for the time being. I continued checking my hive bodies and supers. There were a lot of bees between the frames and when checking my frames, I saw all stages of the brood process. I did not find my queen but I knew everything was good, having seen eggs and larva.

When I got down to my bottom brood chamber, it was completely empty. No bees, brood or honey stores. The bees must have moved up over winter. I took off the bottom brood chamber so that I could move it to the top and give my girls more room to move up if need be. As I took off the hive body, I noticed a few bees were dead on the bottom board. It all came together now with the dead bees laying at the front of my hive. Some of my girls had died over winter and the colony was cleaning them out.

All is good in the hive. My bees were looking good, I added more fondant, reversed my brood chambers and removed my hive top feeder.

I am ready for spring to come!

Treating My Girls For Mites

Now that the Honey Harvest is finished for my hive, I am beginning to prepare for fall. I had previously reduced the main entrance and closed off the upper entrance to help prevent robbing bees from entering my hive. Using a wooden hive top feeder, I have begun to feed my bees sugar water (2:1 ratio of sugar to water) mixed with the feeding stimulant Honey-B-Healthy. They have taken to the feed and I am checking on it every week ( so far I have added 3 gallons).

Looking into a Hive

Last time I was in my hive, I went through all the brood chamber, checking for eggs and making sure there was a decent brood pattern. I was somewhat disappointed to find that only the bottom two brood chambers had larva and eggs. I have a third brood chamber, mostly filled with honey, and above that, lays a honey super below my hive top feeder. While feeding my bees, I was hoping that the added food would implement laying from my queen.

I rotated my upper two supers, thinking that she might not have room to lay with the frames in the third brood chamber being mostly honey. While I was in my hive, I was thoroughly inspecting my bees for any deformity in their wings or visible mites. During my inspection I noticed some of my bees had smaller spread wings where as the normal bee would have their wings flat against their back. My next task was to check my mite count and see if I needed to treat.

Photo By: Lazy B Farm

My bees were not to this extent but you could see a slight difference between them and the norm.

After using a corex sheet in my IPM bottom board, I was relieved to have a mite count below the average 40 to 50 mites but I thought it best to still treat. The recommended treatment from other beekeepers was Api life Var. This treatment comes in a pack of two wafers (strong odor and should be handled with gloves), with one wafer being used per hive. 

Api life Var Package

After opening the package, I took one wafer and broke it up into four separate pieces to go on the four corners of my brood chamber. For the treatment to work properly, I needed to place these four pieces on top of my bottom brood chamber and close up my hive so that the vapors would not escape. I ensured that my entrance was reduced and my corex sheet was in place beneath my IPM bottom board.

Wafer Pieces on the Corners

Closed up my hive and now I am waiting 7 to 10 days to repeat the treatment (2 more times). I was told that if I were to see a vast majority of my bees outside of my hive, the vapors are to overpowering and I need to reduce the amount of wafer pieces I am treating with. I need my girls to be mite free ( or close to it) going into to winter.

Cleaning out the pests!

Adding a Honey Super

It has been a couple weeks since I have had a chance to check on my hive. The nectar flow has been tremendous with little spurts of rain here and there. To give you an update on where I am with my hive, I took a picture of the three brood chambers.

Bee Hive

Here is a time frame of what I have done since purchasing my hive:

Weekly Time Frame	What was done during the week
Week 1	I purchased my Hive Equipment along with a package of bees. Painted the outside of all wooden components. Set up my hive in its location.
Week 2	Installed my package of Bees
Week 3	Removed the queen cage from the hive. Made sure she was released and laying. All was good and experienced my first bee stings of the season.
Week 4	Installed another Brood Chamber
Week 6	Installed another Brood Chamber
Week 8	About to install my first Honey Super

When going out to check on my hive, I was hoping to find that my third Brood Chamber would be filled with eggs and larva, just ready to burst. With that expectation in mind, it was a great sign when I removed the inner cover to find all my frames had drawn out comb. Removing the first frame I did not see any sign of brood or larva within the cells, only nectar and pollen. As I began to move into the center frames, I was finding the frames were mostly honey and nectar rather than laid eggs. This was not a good or bad sign, it just meant that the nectar flow was so good and the queen didn't find any need to continue laying in the upper brood chamber, at least I was hoping so.

Checking the Frames

I started working down into my next brood box and I began seeing plenty of eggs and larva within the cells. My queen was present and still laying, she just did not have the need to move into the upper brood box. My intent was to add a honey super onto my hive and after speaking with my mentor, he suggested that I take the center four frames from my upper brood box and transport them into my honey super. With it being mostly nectar and pollen in these frames, it will give the bees incentive to move up and begin to work the other frames in my honey super.

Removed Four Frames

Note: If i was not able to transfer these frames into my honey super I would have sprayed my foundation with sugar water to entice the bees to move up.

When talking to another beekeeper, he had mentioned that another option would have been to add a super beneath the brood chamber that was mostly nectar and pollen. He said that this would relieve congestion within my hive. 

I went with my mentors approach and transported four frames into my honey super and replaced them with frames containing foundation. Placed a queen excluder on top of my brood chambers, set my honey super on top and closed off my hive. By placing a honey super on so late I probably will not be able to harvest honey this year. Those frames that do contain honey will more than likely be used as feeding frames.

I can still hope though!

Adding Another Brood Chamber

Before I stepped into managing my bee hive, I read books and watched videos. There was a lot of good information out there and some great demos but I can now see how hard it could be to capture every aspect of beekeeping. I'm sure that at some point I had read about this or seen photos describing it, but when I went out to my bee hive to add an additional brood chamber, I had noticed some weird formations in the comb that was being drawn out.

Photo By: Chris Bednarek

I saw that the drawn comb was forming specifically where my frames were spaced further apart and no where else. I was hesitant about pulling out the frame because they had attached the comb to the opposite frame.
I began removing the frames from the edge, working my way toward the gaped frames. Using my hive tool, I scraped the comb off from one of the frames. I knew that removing the frame would tear out the comb from the other, but it had to be done. Once the frame was removed, I was able to pull off the excess comb so that the frames could be properly set within my hive body.

Just another learning experience from a newbie.

Checking on my Queen

At the end of last week I finally had a chance to go back to my hive. I wanted to go back and remove the queen cage that I had bound to a frame. I removed my inner cover and noticed the rubber band was missing that I had used to secure the queen cage with ... I was a little scared that it broke and the cage had dropped. I did notice, before I began removing frames, some of the worker bees were sticking there tail ends in the air and beating there wings. They were fanning out pheromones signaling  their sisters to come to them.

A Lady Fanning Her Pheromones 

I slowly began removing frames and was checking thoroughly for my queen. With the first frame removed I was able to see the queen cage and it was empty (thank goodness). I knew the queen had been released but was she laying? As I started turning over the frame in my hand I noticed a queen cell. This was just my luck to  install a new hive and have the queen already replaced. I didn't know how this had already happened and what it meant for my colony. Set the frame down and gave my mentor a quick call (would highly recommend attending a bee meeting and make some friends).  As to what was going on: 

When a colony is first installed into the hive, the queen is still in her cage and will not be laying for a couple of days. During this time that she is caged, the colony has interpreted her as being weak, therefore the begin to develop queen cells. When she is finally released and begins to lay she will go through and kill off the queen cells that were produced. I was told not to worry, scrap off the queen cells and go through my frames and check for eggs and larva. I was also told that as a newbie I was to remove the queen cell and taste the royal jelly that it held..."It is a delicacy and is the initiation into beekeeping". Lets just say I'm a beekeeper.

He also mentioned that if the queen hadn't been released and I was still seeing queen cells, the package that I had received had a queen already in it. In this case I had many different options.

I removed the queen cell from the frame and began looking for eggs. While looking over the frame I noticed that the bees were already storing food and out of the glimpse of my eye, I saw her!

My Queen Bee

I was really excited to be able to spot my queen and see that she was doing great. I checked some other frames and noticed patches of laid eggs and larva. I concluded that the bees must have chewed through the rubber band and everything was okay. 

My hive was looking great, the colony strong and I was happy.